Share < Back

85108800 Keith Walking Floor RFII, Workhorse & KFD Cartridge Valve SV10-40M-0-N-0 HF

Keith Walking Floor RFII, Workhorse & KFD & Clean Sweep Cartridge Valve SV10-40M-0-N-0 HF 

This is the Cartridge Valve for the electric coil /solenoid / magnet. There can be up to 2 of these on a system. They are used for On/Off control if you have an electric version and for the Load/ Unload control valve if you have an electric version. The valve fits to the coil which fits to the wiring plug. The coil and plug are sold separately as part numbers: 
Coil / solenoid / Magnet 85600250 
2 Pin wiring plug 85600100 

This is a common part to Running Floor II, Workhorse and Frameless Series Systems.

You may also need the coil 85600250 and the wiring plug 85600100 sold seperately.

Related Parts:

85600250

Keith® Walking Floor® Keith Walking Floor Coil / Magnet for Solenoid 24VDC Cartridge Valve
Keith Walking Floor Coil / Magnet for Solenoid 24VDC Cartridge Valve £40.89

03244610

Keith® Walking Floor® Keith Walking Floor® RFII & Workhorse Control Valve Assembly.
Keith Walking Floor® RFII & Workhorse Control Valve Assembly. £1,020.21

04840002

Keith® Walking Floor® Keith Walking Floor® Workhorse - On/Off Ball Valve Assembly Manual For Workhorse
. £707.55

04465802

Keith® Walking Floor® Keith Walking Floor® Workhorse - On/Off ball valve WITH FILTER complete
Keith Walking Floor® Workhorse - On/Off ball valve WITH FILTER complete £1,040.70