Description

Fruehauf Food Waste & Offal Watertight Tipping Trailer For Sale

65 cuyd alloy body on a steel straight frame chassis 

Tri axle on air with a front lift axle

SAF Axles and SAF drums 

Side Wall: 50 mm thick aluminium plank-sided wall. 4.2 mm inside skin, 2.8 mm outside skin. Fully seam welded 

Planks are clipped together, then fully seam-welded on the inside. 45 degree side profile at base.

Floor: 6 mm aluminium sheet, rear 1200m in 8mm.

Backdoor: 4 sided rubber seal, special hinges, 4.76mm thick with 4 off top hinges, from rear header bar. 

6 off twist locks style cattle clamps, 1 on each side; 4 x twist locks at base of door; tailgate locking bar with 5 tabs.

Turner Active Pressure Autogate fitted. This door type means that if pressure from the load has built up there is a clamp rear door mechanism that should not jump or be defeated. This is a safety feature and costly.

Rubber sealed Door

Manual Sheet System with surge plates front and rear to prevent load sloshing and lifting the sheet under acceleration and braking.

Sheet attached with batten and screwed sheet fittings. Pull cord for easy closing of the sheet.

3 straight sheet stops (depressable).

1 centre crossbar in the middle of the trailer.

Front Catwalk with hinged ladder

Plastic/nylon full body side protection to prevent fork lift mast damage when loading

Toolbox

Water tested to 450 mm depth at time of PDI

Fruehauf Watertight Trailer for Sale; Fruehauf Offal Specification Trailer for Sale; Fruehauf Food Waste Bulker for Sale