Share < Back

70.6066 Aluminium Square Box Extrusion 25 mm x 25mm x 2mm x 5.9 m (1"x1") Length 5960 mm

Aluminium Square Box section Aluminium tube 25x25x2 mm (L = 5960mm)

25 mm x 25 mm x 2mm x 5.9meters(1"x1")

Square extrusion is used on moving floor trailers for mounting the nylon gliders or bearing or twister onto. The square forms the subfloor or sub deck of the trailer. There are 21 of these in a 21 plank Cargo or 24 in a Keith Walking floor subdeck or old Cargo Floor system

Related Parts:

70.6061

Cargo Floor Cargo Floor Box Section 40x25x20mm 6m - used on HD & XHDI 15 plank
Cargo Floor Box Section 40x25x20mm 6m - used on HD & XHDI 15 plank £46.91

21 10mm Ridged Revision Set

Cargo Floor Cargo Floor Plank 10mm x 112mm Ridged Revision Set (20+1) with End Caps - Twist Bearings
Cargo Floor Plank 10mm x 112mm Ridged Revision Set (20+1) with End Caps - Twist Bearings £8,984.41

0300309

Keith® Walking Floor® Keith Walking Floor 24 plank / Slat Bearing 97mm (62mm)
Keith Walking Floor 24 Plank / Slat Bearing 97mm (62mm) £2.37

BALHO00180

Newton Trailers Floor Side Profile or Half Plank 13500mm - For 112mm Wide Planks
Floor Side Profile or Half Plank 13500mm - For 112mm Wide Planks £186.08