| Stock | 5 |
|---|---|
| Postage | 35kg (2 pallets) |
| Price | £578.17 +VAT |
| Quantity |
| Type | New, Branded |
|---|---|
| Newton Part No. | N1002200 |
| Manufacturer Part No. | BDICO01020 |
| Fitting Time | 4 hours |
| Expertise | High |
| Requirements | Standard PPE (Eg gloves, boots, goggles, helmet) Consumables (Eg cable ties, nuts, bolts, grease, etc) Impact & alignment tools (Eg hammer, punch set, pry bar) Load support (Eg axle stands, chassis blocks, body supports) Access at height (Eg steps, platforms, harness, scaffold tower) |
| eCO2 Content | 66.5kg |
| Confidence | 1 (low) |
| Checked | 09/11/2022 |
Replacement rear header bar / top beam for Knapen moving floor trailers fitted with the pre-2017 rear door system.
This version is designed for the double-lock arrangement, with a distance of approximately 360 mm between the centre keeper channel and each outer keeper channel.
It can also be used on trailers with single-locking rear doors, subject to the existing door and keeper configuration.
For a standard Knapen trailer, the centre-to-centre width of the rear top header bar is approximately 2514 mm.
Product Details:
Please check the keeper spacing and overall dimensions against the existing header bar before ordering, particularly on trailers with non-standard rear door configurations.
Share
