Share < Back

197720 Load Cell Trunnion 70mm Bore - Tipping Bars & Edbro CS19 /Hyva Rams

PM on Board Vishay Trunnion 70mm DIA Bore. Used on Tipping Bars, 19" Hyva Rams, most older CS series Edbro Rams & All CS19 Series Edbro Rams

This is the block that sits on top of the load cell & supports either the tipping bar at the rear of the body or the Ram at the front, Please check bore size carefully before ordering to ensure a match for your trailer.

Also Available:
N1002027 2.25" Bore for early Hyva Rams
N1003945 2.50" Bore for early Crane Fruhauf
N1003944 2.75" Bore
N1004225 60.5mm Bore for Edbro/Hyva Rams
N1001730 65.5mm Bore for Tipping Bars
N1003947 70.5mm Bore for Tipping Bars & Edbro/Hyva Rams
N1003946 80.5mm Bore

Related Parts:

CS190S66545B70A03

Edbro Edbro HP190S66578S70A02 (CS190S66545B70A03) Tipping Ram / Cylinder for Benalu
Edbro HP190S66578S70A02 (CS190S66545B70A03) Tipping Ram £2,772.00

BB106

Edbro Edbro Ram Cradle CS19 - CS22
Edbro Ram Cradle CS19 - CS22 £137.98

N1003805

MX OnBoard Fruehauf MX Analogue Load Cell Replacement
Fruehauf MX Analogue Load Cell Replacement £196.25

FAB0034

Newton Trailers Load Cell Trunnion 70mm Bore - Used on Tipping Bars, 19" Hyva Rams, Most Older CS Series Edbro Rams & All CS19 Series Edbro Rams
Load Cell Trunnion 70mm Bore - Used on Tipping Bars, 19" Hyva Rams, Most Older CS Series Edbro Rams & All CS19 Series Edbro Rams £86.85

197825

PM OnBoard Load Cell Trunnion 60.0mm Bore (60.5mm) - Edbro/Hyva Rams Up To 18"
Load Cell Trunnion 60.0mm (60.5mm) Bore - Edbro/Hyva Rams Up To 18" £71.15